Now booking free roof inspections in SeminoleRoof Copilot License · CCC1336568

Tile Roofing in Seminole, FL
Save the Tile, Rebuild the Layers Below It.

Tile roofing in Seminole usually comes down to one question. Is the tile worn out, or is it the membrane under it? On many tile roofs the tile itself is sound and the underlayment has quit, so the job is to take the tile up, lay new underlayment and set the good pieces back. Every tile job we do carries a 15-year written workmanship warranty on top of the manufacturer's.

15-year workmanship warranty in writing, on top of the manufacturer's
Each slope, hip and ridge measured from high-resolution imagery first
Photos of the new underlayment in your portal before the tile goes back
Licensed & insured
Roof Copilot · CCC1336568
Get your free roof quote
$0 · NO OBLIGATION

Takes about 30 seconds. A local roofing specialist follows up the same business day.

What do you need?

We never sell your info 30 seconds Licensed & insured
Step 2 shows your roof from above with its size and pitch, before anyone visits.
15
Year warrantyWorkmanship, in writing
FL Lic. CCC1336568Licensed & insured
$0
InspectionNo pressure, ever
1979Median year built for City of Seminole homes (2020 to 2024 Census estimates)
51 in.Yearly rain on Seminole roofs, from 10 years of ERA5 model data
TileIts own Express reroof permit type with Pinellas County
15 yearsOur written workmanship warranty on tile work

Tile Roofing in Seminole: Look at What’s Under It

A tile roof hides its problems well. The concrete or clay you see from the driveway can stay solid and good looking long after the sheet beneath it has stopped doing its job. So when a Seminole homeowner calls about a tile roof, the first thing we want to know is not how the tile looks. It is what condition the underlayment, the flashing and the deck are in.

We haven’t found a reliable public count of how many Seminole houses have tile. This page is for owners who have tile now, or who are thinking about it. If your house has shingles, our shingle roofing page is the better read. If you already know the whole roof has to go, roof replacement covers every material.

Concrete tile roof on a Florida house
From the street a tile roof can look fine for years after the layer below it has started to fail

Concrete Tile and Clay Tile on Seminole Houses

Two materials make up nearly all residential tile, and they don’t behave the same way once you are standing on them.

Concrete tile is made of cement and sand pressed into a mold. It comes flat, in an S curve or as a barrel, and each piece is heavy. It tolerates a careful footstep better than clay does. When we need a replacement piece, a close concrete match is usually easier to track down.

Clay tile is baked in a kiln. You see it most as a barrel shape on Mediterranean and Spanish-style homes. The color runs through the body of the tile, so it fades slowly, but clay is brittle. One wrong step on the crown of a barrel can split it, and a clay color made twenty years ago may be gone from the market today.

On either kind, the tile is the shield. The underlayment is the waterproofing.

Telling the Two Apart

  • ConcreteCast from cement and sand; flat, S and barrel shapes; heavy per piece; takes a careful step better
  • ClayKiln fired; often barrel shaped; color goes all the way through; breaks easily underfoot
  • ReplacementsConcrete shapes are easier to source; an old clay color may not be made anymore
  • Same jobBoth shed most rain and shade the roof, and both count on the underlayment to stay dry

Why the Membrane Gives Out Before the Tile

Tile laps over tile, but the laps are not sealed. Rain, and especially rain blown sideways in a summer squall, finds its way between pieces. That is expected. The underlayment below is there to catch it and carry it down to the eave, where it drains off the edge.

Seminole roofs take about 51 inches of rain in a typical year, going by ten years of ERA5 model data. Some fraction of every storm runs across that underlayment, while the attic below bakes it through the long summer. Over time it dries, cracks and pulls loose at the laps. The tile above may have decades left. The membrane under it often does not.

That mismatch is why a stained ceiling under a roof with no broken tile is so common. If you have water coming in right now, our roof leak repair page explains how we trace it to the opening and stop the active leak.

1 · Tile sheds most of the rain2 · Water that gets past itruns down the underlaymentThe underlayment does the real waterproofing
Water that gets past the tile travels down the underlayment to the eave

Pull, Re-Underlay and Re-Set: The Typical Tile Job

Since the tile frequently has life left, a good share of tile work is a reset, not a new tile roof. The sequence is simple to describe and slow to do well.

The crew takes the tile up by hand, course by course, and stacks the usable pieces on the roof. The old underlayment comes off down to the wood, along with tired flashing at the valleys, walls, pipes and edges. Any soft or rotten sheathing is cut out and replaced, and the deck is re-nailed. New underlayment and new flashing go down. Then the same tile goes back on, with matched replacements filling in for anything that broke.

Sometimes only one slope or a single valley has failed, and that is all that needs to come up. Other times the tile has gone soft or chalky across the whole roof, and new tile makes more sense than saving it. The free inspection sorts out which case you have, and the photos show you the reasons.

Because the tile is usually the most expensive part of the roof and you already own it, a reset tends to cost less than starting over with new tile.

04Decking, rottedwood replaced03Peel and stickunderlayment02Flashing, pipeboots, drip edge01Matched shinglesand ridge caps
Deck first, then underlayment and flashing, then the tile is set back on top

Replacing Broken Tiles One at a Time

Plenty of tile trouble is small. A limb comes down in a storm. Someone fixing a dish or a vent steps on the wrong spot. A hip cap loosens after years of wind. These are spot repairs, and they fall under regular roof repair.

It takes patience. The cracked piece has to come out without breaking the tiles that overlap it. Once it is out, we check the underlayment it was covering before a new tile goes in. If the color you have is no longer made, a tile can be borrowed from a back slope nobody looks at, and the new one goes back there instead.

Don’t let a cracked tile sit. Every open crack sends water to the same small patch of underlayment, again and again, and a membrane that is already aging won’t hold out for long.

When we walk tile, we step on the low end of each piece where it is supported by the course beneath, and we stay off barrel crowns and unsupported spans. We bring spare tile so anything that cracks during the work is replaced before we leave.

Spot Repairs We Do on Tile

  • Cracked field tileLifted out and replaced, and the underlayment below it looked at
  • Tile that slid downReset and fastened back in line with its course
  • Loose hip or ridge capRe-set and re-attached along the whole run, not just the gap
  • Rusted or bent flashingReplaced at the wall, valley or pipe while the tile is off

Fastening Tile for Gulf Wind

Weight alone won’t keep tile on a Seminole roof in a hurricane. Every piece is attached. Depending on the tile product and the wind design for the house, that means nails or screws, an approved foam adhesive, or both. Hip and ridge caps have their own attachment method along the top.

During Milton, the National Hurricane Center’s report logged a peak gust of about 77 mph at the Pinellas County EOC, the station closest to Seminole. Wind like that pulls hardest at eaves, rakes, hips and ridges, and that is where slipped and missing tile usually shows up afterward. On a reset, tile is attached the way its product approval spells out, not the way the last installer chose to do it.

After a storm, walk around the house and look up. Tile pieces in the grass, a gap in the ridge line or a crooked row are worth a call. Our storm damage roof repair page explains that work. You get a documented photo report you can share with your insurer, and the claim stays between you and them.

RidgeEaveEave
Uplift is strongest at eaves, rakes, hips and ridges, where tile is most often lost

Where the Tile’s Weight Sits on the Deck

Tile ranks among the heaviest roof coverings you can put on a house. A home built with tile was framed to carry it, but decks age, and a reset is the first time in years anyone has seen the wood.

That makes it the time to fix the deck. Rotten sheathing gets replaced and the whole deck gets re-nailed before underlayment goes down. On a City of Seminole permit, the city’s Roofing Compliance Affidavit asks a person licensed under Chapter 468 of the Florida Statutes, or an engineer or architect, to certify that the deck nailing and secondary water barrier were done to Section 706.7 of the Florida Building Code’s existing building volume.

Putting tile on a house that had shingle or metal adds a heavy new load. The framing has to be looked at first, sometimes by an engineer, before tile is priced. Going from tile to a lighter material is easy on the structure.

Before any tile covers the work, photos of the deck, underlayment and flashing go into your homeowner portal. Those are the layers nobody sees again.

Florida roof in progress with the deck exposed
With the tile off, bad sheathing is cut out and the deck is re-nailed before new underlayment

What the City Inspector Checks on a Tile Reroof

Inside city limits, the Building Division runs an in-progress inspection while the roof is open. By then the underlayment and drip edge have to be fully installed, and the Roofing Compliance Affidavit has to be on site or in the permit box. If it isn’t there, the inspection fails. Inspections called in by 2 pm get a next-day slot, and on a home one inspector covers every trade.

The city also tells roofers not to stop and wait on a late inspector, because protecting the house and the people in it comes first. Photos are accepted for the in-progress stage only when the inspector says so. The final inspection is scheduled after the in-progress one has fully passed, with the roof 100% done.

For a Seminole address on county land, Pinellas County requires an in-progress inspection on every reroof after dry-in and with the roof loaded. On tile, a loaded roof means the tile is stacked up there waiting to go on. We book each inspection as the job reaches it.

Inspections on a Seminole Tile Reroof

  • City in-progressUnderlayment and drip edge fully installed, Roofing Compliance Affidavit on site or in the permit box
  • City schedulingCalled in by 2 pm for a next-day inspection
  • County in-progressAfter dry-in and with the roof loaded, as Pinellas County requires on every reroof
  • FinalRoof 100% complete, and only after the in-progress inspection fully passed

Partial Tile Work and the 25% Rule

Florida’s Existing Building Code caps patchwork. Work on more than a quarter of a roof, or of one roof section, inside a 12-month window triggers a requirement: that whole roof or section has to be brought to the current code.

There is a carve-out in state law. If the roof on the house now was installed under the 2007 Florida Building Code or later, only the portion being repaired has to meet current code, and local governments can’t override that.

City of Seminole homes have a median build year of 1979, so most went up before the 2002 Florida Building Code. What matters for the 25% rule is when the current tile roof went on, not when the house was built. Before planning a partial reset we pull the permit history and tell you which side of that line your roof falls on.

How Much Tile Can Be Redone at Once

Under 25%Only the repaired area has to meet current code
25% or moreThe whole roof or section must meet current code, unless the existing roof was built to the 2007 code or later

Association Approval for Tile in Seminole

About a quarter of City of Seminole homes are in buildings of 20 or more units, and the city’s own history names communities such as the Woodbridge and Timberwoods condominiums and the Townhomes of Lake Seminole. Associations often have roof rules: tile only, a list of approved colors or profiles, or metal and shingle allowed with board approval. Those rules come from the association’s own documents, not from the city.

If you are in an association, get approval in writing before work starts. Resetting your own tile raises few questions, since the house looks the same afterward. A new color, a new profile or a different material is the kind of change boards review. The quote spells out the material, profile and color, which covers what most boards ask for.

Before You Send a Request to the Board

  • Read the documentsYour association's rules decide what roof material and color are allowed
  • Like for likeResetting your own tile changes nothing visible from the street
  • A changeNew tile color, a new profile or a different material usually needs review
  • PaperworkYour quote names the material, profile and color the board will ask about

Trading Tile for Metal or Shingle

Not everyone keeps tile. The pieces may be too worn to save, or an owner may want a lighter roof that is easier to maintain.

Standing seam metal weighs far less than tile, holds tight at the edges in high wind and changes the look of the house from the curb. Architectural shingle has the lowest upfront cost of the three and the shortest life. New tile usually costs the most upfront, but when your old tile can go back on, a reset narrows that gap a lot.

Your quote comes as Good, Better and Best options, so a reset, a new tile roof and a metal roof can sit side by side. You sign the one you pick from your phone, and the price is locked once we send it. Monthly payment options are available. We don’t list prices here because every roof is measured before it is quoted.

Three Ways Forward from an Aging Tile Roof

  • Reset the tile you haveSame look, same weight, new underlayment and flashing below
  • Standing seam metalFar lighter on the framing, a clean modern look from the curb
  • Architectural shingleLowest upfront cost of the three, with the shortest life
Your Good, Better and Best quote can put a reset next to a material change

Re-Tiling and Seminole’s Two Flood Rules

According to the city, about 11% of properties in the City of Seminole sit in the 100-year floodplain, with Long Bayou, Cross Bayou and Lake Seminole named as the flood sources. In those areas the city applies a 50% rule. When the cost of a project equals or exceeds 50% of the building’s market value, the building has to meet the standards for new construction. The city’s review form lists re-shingling or re-tiling a roof among the costs it counts. Each project is measured on its own.

Seminole addresses on county land fall under Pinellas County’s rule instead: 49% of the building’s market value. Florida law since mid-2025 keeps local flood ordinances from stacking repairs over a span of time, and we ask the permit office how any past work on the house is treated. A tile reset by itself rarely gets close to either line. A new tile roof stacked with other storm repairs might. We check where your house stands before you sign.

Re-Tiling Inside City of Seminole Limits

Under 50%The tile job is permitted like any other reroof
50% or moreThe building has to meet the standards for new construction, including floor height

Who Permits a Tile Roof in Seminole

A Seminole mailing address doesn’t tell you which office issues the permit. Only about a quarter of the land in the four Seminole ZIP codes is inside city limits. Even three of the city fire department’s own stations sit outside them.

To check, look up your parcel on pcpao.gov. Tax district SM means the City of Seminole, and the Building Division on 113th Street issues the permit through its Citizenserve portal. STF or SRT means unincorporated Pinellas County, where tile is its own Express reroof permit type. Either way, we pull the permit in our name and book the inspections.

We also do tile work around Seminole, including Bardmoor, Bay Pines and Ridgecrest, and we confirm the right permit office at the start of each job.

Permits for a Seminole Tile Roof

City parcels
City of Seminole Building Division, 9199 113th Street, (727) 391-0204, Citizenserve portal
County parcels
Pinellas County Building & Development Review Services, 440 Court St., Clearwater, (727) 464-3888
Permit holder
Roof Copilot, in our name, with the permit in your portal

Our Written Warranty on Seminole Tile Work

Tile work comes with a 15-year workmanship warranty in writing, on top of the manufacturer’s coverage on the materials. We install a matched system from one manufacturer and buy direct from manufacturers, so the underlayment, flashing and accessories are made to work together.

The roof is measured from high-resolution imagery before anyone visits, so the quote starts from real numbers. You can open the homeowner portal any time to see the schedule, read the documents, message us, and look at photos of each layer before it was covered. Roof Copilot holds Florida certified roofing contractor license CCC1336568 and carries liability and workers’ comp.

What Comes with Every Tile Job

  • Warranty15-year workmanship warranty in writing, on top of the manufacturer's coverage
  • MeasurementsSlopes, hips and ridges measured from high-resolution imagery before we visit
  • PortalSchedule, photos of the hidden layers, documents and messages in one place
  • LicenseFlorida certified roofing contractor CCC1336568, with liability and workers' comp

How a Seminole Tile Roofing Job Runs

  1. 01

    Send Your Address

    We measure each slope, hip and ridge from high-resolution imagery before the visit.

  2. 02

    Free Inspection

    We check the tile, caps and flashing, look at the underlayment and deck from the attic and under lifted pieces, and give you the photos.

  3. 03

    Choose and Sign

    A spot repair, a reset or a new roof, priced side by side and signed from your phone. No pushy sales visit.

  4. 04

    Built and Cleaned Up

    We pull the city or county permit in our name, do the work, book each inspection and clean up before we leave.

See our full residential roofing work, or book a free roof inspection for your Seminole tile roof.

Recent work

Roofs We're Proud Of

Tile roof, completed
Tile roof, completed
New architectural shingles
New architectural shingles
Standing seam metal, done
Standing seam metal, done
Crew laying shingles
Crew laying shingles
Complete reroof
Complete reroof
Our promise
15

Year workmanship warranty in writing, and it is added to the warranty the manufacturer gives on the materials.

🧾 Permits handled

We pull the permit in our name, and the roof is built to meet Florida code. You won't have a form to fill out.

🧹 Cleanup included

We haul the torn-off roof away, and a magnet passes over the yard and driveway to pick up stray nails.

🛡️ Licensed and covered

Florida certified roofing contractor CCC1336568. Our policies include general liability and workers' comp.

💳 Monthly options

Spread the cost into monthly payments so the roof doesn't have to wait.

Questions

Seminole Tile Roof Questions

The Tile on My Seminole House Looks Fine. Can the Roof Still Leak?

Yes, and it happens often. Tile sheds most of the rain, but some always gets underneath, and the underlayment carries it off. Once that layer splits or dries out, water reaches the wood even though every tile on top is whole. Lifting the tile over the wet area shows what is going on.

Will You Reuse My Existing Tile?

When it is in good shape, yes. Each piece comes off by hand and gets checked. Sound tile is stacked on the roof and goes back on after the new underlayment. Broken or crumbling pieces are swapped for matching tile, and if most of the roof is worn out, the photos will make that plain.

How Do I Know If My Seminole Address Is in the City or the County?

Look the property up on pcpao.gov and check the tax district code. SM means the City of Seminole, and the city's Building Division issues the permit. STF or SRT means unincorporated Pinellas County. We pull the permit in our name either way.

Can My Roof Framing Carry Tile If I Have Shingles Now?

Not always. Tile weighs much more than shingle or metal, so the rafters or trusses have to be checked before tile is even quoted, and sometimes that takes an engineer. Going from tile to a lighter roof raises no such question.

Do You Handle My Insurance Claim After a Storm Cracks Tile?

No. We give you a documented photo report of the damage that you can share with your insurer. The claim stays between you and your insurance company.

Is There a Monthly Payment Option for a Tile Reset?

Yes. Monthly payment options are available on tile spot repairs, resets and new tile roofs.

Free, no obligation

Get Your Seminole Roof Measured, Free.

Enter your address. We'll handle everything else.

Or call (727) 910-1300
Call (727) 910-1300Free quote